4mm(alu 0,40x0.40 mm) PVDF coating fireproof Aluminium composite panel

How to clean and maintain PVDF paint?
PVDF paint coated on the surface of aluminium composite panel needs to be cleaned and
maintained professionally. This not only helps maintain the clean surface of building
wall, but also removes the smear which may corrode the paint. Therefore, PVDF paint
can maintain its quality for a long time.
The cleaning cycle depends on the environment condition and degree of contamination.
We suggest that outer wall should be cleaned at least once a year. The inner wall
can be cleaned according to the degree of contamination.
Wall cleaning should be conducted manually or by come suitable cleaning equipment,
from top to bottom. Please don’t use any corrosive materials to rub the surface.
1. First, you should use a large amount of clear water to wash the surface of panel;
2. Use soft cloth to rub the surface of panel. Soft cloth should be soaked with
water-detergent solution;
3. Wash away the dirt on the panel;
4. Check the surface of the panel. To those places still unclear, you can use
detergent to clean it again.
5. Wash the panel until no detergent is left on the surface.
Notice!
B grade PE coating fireproof aluminium composite panel
Jiangsu Xiecheng Science and Technology Development Co.,LTD. Is a Sino-Russian high-tech
joint venture corporation, which is also an integration of Science, Technology and
Trade.We are a professional Fireproof ACP manufacturer.Our fireproof aluminium composite
panel is formed through continuous thermal compounding. The compounding materials are two
0.5mm(0.45mm;0.4mm) thick aluminium sheets and fire resistant geopolymer core.
Surface of fireproof aluminium composite panel is coated with PVDF(Nano) paints. The
protective film adhered on the top surface can be peeled off. The back sheet of
aluminium composite panel is anti-corrosive PE aluminum panel. Our fireproof ACP is
suitable for high buildings and decoration requiring good fire retardancy